Autocom CDP and CDP+ clone devices rely heavily on an internal FTDI (Future Technology Devices International) chip to convert serial communication from the vehicle into a USB-readable signal for your computer.
This level of repair is not for the faint of heart, but for those with advanced electronics skills, these guides can resurrect a device that would otherwise be considered e-waste.
Never attempt a firmware update using only USB power; the device requires the 12V from the OBD2 port to remain stable.
To get your Autocom CDP working, you must ensure the computer recognizes the VCI (Vehicle Communication Interface) Chipset Type: Most Autocom/Delphi clones use the FTDI (Future Technology Devices International) Driver Path: autocom cdp- usb driver software - MHH AUTO - Page 1
:
Also, If you want to add any specific information, keywords or need any changes let me know.
Some modern laptops with UEFI BIOS and Secure Boot enabled may have difficulty recognising unsigned legacy drivers. In such cases, disabling Secure Boot or running the diagnostic software inside a virtual machine (such as VMware Workstation) may resolve the issue. One member specifically noted that “running windows 7 in a VMWare session” was attempted, though the problem persisted due to USB passthrough limitations. Autocom CDP and CDP+ clone devices rely heavily
This short message, likely accompanied by a file attachment (now lost in the printable version), provided the necessary driver files. Other users echo their success:
Navigate to MHH AUTO -> Diagnostic Hardware Section -> Autocom/Delphi -> Look for the sticky titled "Autocom CDP 2013 USB Drivers Working Win10/11 - Page 1".
No article about Autocom CDP+ driver software would be complete without mentioning . As one of the largest forums dedicated to automotive diagnostic tools, MHH AUTO has become the de‑facto central repository for troubleshooting advice, firmware files, software downloads, and activation guidance. The forum’s threads, spanning more than a decade, contain solutions to nearly every issue a CDP+ user might encounter. To get your Autocom CDP working, you must
The file you need, often described as "CDP+ USB driver software", is the bridge between your diagnostic interface and your Windows PC. For many Autocom devices, the driver is built around the chip.
While the Autocom CDP- USB driver software is generally reliable, you may encounter issues during installation or use. Here are some troubleshooting tips to help you resolve common problems:
If you downloaded a clean driver pack from MHH AUTO, extract the .zip or .rar archive to a easily accessible location like your Desktop. 2. Open Windows Device Manager Connect the Autocom CDP+ Go to product viewer dialog for this item. device to your computer via the USB cable.
Below is a summary of the most helpful information regarding Autocom CDP USB drivers based on common forum solutions and technical requirements. 🛠️ Essential Driver Information