To set up alarms:

Compiles project files and checks for illegal variable addresses or broken links. Click Build -> Build All

If using Ethernet, enter the HMI's IP address and click send. The HMI will automatically restart and boot into your new application. Summary Checklist for Success

Before placing buttons, the HMI needs to know where to get its data. I/O Manager: Right-click the I/O Manager in the Navigator pane. Add Driver: Select the protocol for your PLC (e.g., Modbus TCP/IP for Ethernet or Schneider Electric - SoMachine Network for M221/M241 PLCs). IP Address:

Your HMI needs to talk to the controller (PLC). Vijeo Designer makes this easier by using drivers, so you don't have to write complex communication code.

A Step-by-Step Guide to Vijeo Designer 6.2: A Tutorial

Input the target PLC's static and matching slot parameters. 2. Variables and Tag Management