V2ray Mikrotik «Working»

Before diving into commands, you must understand the difference between a and a V2Ray server .

Open the terminal and create a firewall mangle rule to capture traffic:%%MAGIT_PARSER_PROTECT%% ip firewall mangle add chain=prerouting src-address=192.168.88.100 action=mark-routing new-routing-mark=to-v2ray passthrough=yes (Replace 192.168.88.100 with the IP of the device you want to proxy). Step 2: Create a Custom Routing Table Route the marked traffic to your local V2Ray gateway IP.

Ensure the container package is installed ( /system/package/print ). v2ray mikrotik

MikroTik’s Container feature (introduced in RouterOS v7) makes running V2Ray directly on the router possible. Below is a step-by-step guide to configuring V2Ray on MikroTik using Containerization and Policy-Based Routing. Prerequisites and Requirements

If your use case is bypassing the GFW, static routing fails because the GFW blocks based on SNI (domain name), not IP. You need domain-based routing. Before diving into commands, you must understand the

To connect MikroTik to a V2Ray server, you generally choose between two architectures depending on your hardware:

is a sophisticated platform for building custom proxy servers. It supports multiple protocols (VMess, VLESS, Trojan, Shadowsocks) and advanced obfuscation techniques like WebSocket + TLS to bypass deep packet inspection (DPI). Why integrate it with MikroTik? Prerequisites and Requirements If your use case is

Unlocking V2Ray on MikroTik: A Guide to Advanced Censorship Circumvention

/ip/address/add address=172.17.0.1/24 interface=bridge /ip/firewall/nat/add chain=srcnat action=masquerade src-address=172.17.0.0/24 Use code with caution. Phase 2: Deploying V2Ray/Xray Container

Use Mangle rules to mark connections that you want to go through the proxy.

This method keeps your hardware footprint minimal by running the proxy directly on a compatible MikroTik router. Prerequisites A MikroTik router running or higher.