After you decide to purchase a thyssenkrupp stairlift, the company's standard procedure is to send a certified agent to your home. Their purpose is to survey your staircase, take precise measurements, and determine exactly how the installation should be carried out.
Installing a stair lift involves structural work and electrical connections. Thyssenkrupp highly recommends that the Levant be installed by a certified professional to ensure safety and maintain warranty coverage. 1. Pre-Installation: Site Survey and Preparation
: Connect the charger to a standard 13-amp outlet near the stairs. Ensure charging strips and contacts are aligned for the batteries to charge when parked. Critical Safety Checks Obstructions
Verify the unit slows down and stops automatically at the top and bottom charging stations without hitting the hard mechanical end-stops. Troubleshooting Common Installation Errors Diagnostic Code / Symptom Probable Cause Corrective Action Lift will not move; no lights Battery disconnected or fuse blown thyssenkrupp levant stair lift installation manual full
: For verifying the track pitch.
The information in this article is for general informational purposes only. It does not replace the need for professional installation. The electrical and mechanical complexity of a stairlift presents serious risks of injury, death, or property damage if not installed correctly. Any attempt to install a ThyssenKrupp Levant stair lift without official training and certification is strongly discouraged and will void all warranties. You must contact TK Home Solutions or an authorized dealer for a professional, safe, and compliant installation.
Lay the rail sections on the floor, ensuring the gear rack is aligned. After you decide to purchase a thyssenkrupp stairlift,
This is the core of the Levant system.
The ThyssenKrupp Levant stair lift is a highly reliable, single-rail straight stair lift known for its durability and ergonomic design. Whether you are a professional technician or a homeowner preparing your space for an authorized installer, understanding the full installation manual details ensures a safe, code-compliant setup.
Connect the red positive (+) lead to the remaining open battery terminal. Thyssenkrupp highly recommends that the Levant be installed
Ensure the copper charging strips at the top and bottom of the rail are clean and aligned with the "brushes" on the drive unit.
While the full installation manual is restricted, the is readily available and is a critical document for the stairlift's owner. It contains all the necessary information for the correct and safe use of the stairlift.