Srps En 13670 ((link)) 【2026】

The following standards are referenced in SRPS EN 13670:

The original European standard, , was developed by the European Committee for Standardization (CEN) to provide common requirements for concrete construction throughout Europe. It was designed to replace various national standards and practices with a single, coherent reference point.

A major shift introduced by is the requirement for a formal Execution File . This is not just a set of drawings but a comprehensive quality management document.

Basic structures with low risk. Requires internal routine checks by the contractor. srps en 13670

Ensuring legal compliance with Serbian construction regulations. Safety: Delivering robust and safe concrete structures.

Specification and testing of materials like reinforcement steel or cement. Health and safety requirements for construction sites. 2. Execution Management and Documentation

SRPS EN 13670 applies to the execution of all permanent and temporary concrete structures. It provides common requirements to ensure that the completed structure meets the design assumptions made by engineers. What the Standard Covers The following standards are referenced in SRPS EN

The standard, titled "Execution of concrete structures," is the Serbian adoption of the European standard EN 13670 . It serves as a foundational document for ensuring the quality and safety of concrete construction projects in Serbia. Overview of SRPS EN 13670

The proper placement of steel reinforcement is critical for structural tensile strength. Errors in this phase can lead to catastrophic structural failure. Handling and Bending

Achieving the correct concrete cover (the distance between the outer steel bar and the exterior surface of the concrete) is critical to protect the steel from rusting. Contractors must use non-corrosive spacers (concrete or plastic) at regular intervals to maintain this distance. 5. Concreting Operations: From Mixing to Curing This is not just a set of drawings

Hold workshops for foremen and engineers on tolerances, inspection checklists, and documentation. Use practical examples.

Comprehensive Guide to SRPS EN 13670: Execution of Concrete Structures

The standard provides two classes of tolerances (Class 1 and Class 2). These define the acceptable "deviations" in the final structure's dimensions—such as the verticality of columns or the thickness of slabs—to ensure the building remains safe and functional.

For simple, low-risk structures (e.g., single-story buildings). Requires basic self-inspection by the contractor.