Sp Flash Tool Stuck At __full__ Download Da 100

Uninstall existing VCOM/MTK drivers using and manually reinstall the latest Mediatek (VCOM) drivers. Physical Link

The SP Flash Tool sends the Download Agent ( MTK_AllInOne_DA.bin ) to the device. This file tells the tool how to interact with your specific chip.

If you are trying to flash a MediaTek (MTK) device and the progress bar gets stuck exactly at (or jumps to 100% instantly and freezes), you aren't alone. This is one of the most common errors users face with SP Flash Tool.

Here’s a concise troubleshooting post you can use for forums, social media, or a tech blog: sp flash tool stuck at download da 100

In such cases, professional JTAG or easyJTAG repair is required.

If your phone has a removable battery, try removing it and reinserting it before connecting. Switch Software Versions

Windows 10/11 can block the raw USB access that the DA needs. If you are trying to flash a MediaTek

Unstable physical connection during the handshaking process.

Use an original or high-quality, short data-sync cable.

Windows frequently updates and overrides MediaTek drivers with generic USB drivers. This allows the computer to send the initial DA file but breaks the high-speed data connection required for the actual flash. Clean out your old drivers. If your phone has a removable battery, try

Many users find success by forcing the phone into Preloader mode: Remove the battery from the phone (if it is removable). Open the SP Flash Tool and click . Connect the phone to the computer via USB cable.

: If the device has a removable battery, take it out for at least 30 seconds, reinsert it, and try again without powering the device on.

The default MTK_AllInOne_DA.bin file included with SP Flash Tool does not support every MediaTek chipset, especially newer or highly customized ones.

Hold the volume keys (usually , or just Volume Down ) and connect the phone via USB.