1 × UltraDMA 133/100/66 connector (supports 2 IDE devices) Integrated Subsystems
Orientation Tip: For LEDs (Hard Drive and Power), the positive (+) wire is usually colored (red, green, or blue), while the negative (-) wire is typically white or black. For the Reset and Power switches, orientation does not matter. 5. Clear CMOS Jumper Settings
Because it was built for specific PC brands, a standalone "retail" manual is difficult to find. Instead, users must rely on the technical specifications and jumper settings derived from the original system documentation. 1. Hardware Specifications
Understanding the hardware limits of your board prevents component damage during upgrades. Specification Details Micro-ATX (24.4 cm x 24.4 cm) CPU Socket LGA 775 (Socket T) Chipset ATI Radeon Xpress 200 (RC415) + SB600 Front Side Bus (FSB) 800 / 533 MHz Memory Slots 2 × 240-pin DDR2 DIMM Max Memory 2 GB (Some OEM BIOS revisions support up to 4 GB) Memory Type DDR2 667 / 533 / 400 MHz Non-ECC, Unbuffered Expansion Slots 1 × PCIe x16, 1 × PCIe x1, 2 × PCI Storage Interfaces 4 × SATA 3.0 Gb/s ports, 1 × IDE (PATA) Ultra DMA 133 Audio Realtek ALC888 8-Channel High Definition Audio Network (LAN) Realtek RTL8100C 10/100 Mbps Ethernet Processor and Memory Compatibility CPU Support
This document is a comprehensive manual for the RC415T-AM motherboard. It covers specifications, layout, installation, BIOS configuration, driver and OS setup, troubleshooting, maintenance, and safety. It's written to help technicians, system builders, and advanced users install, configure, and maintain systems based on the RC415T-AM.
The exact you are experiencing?
The back panel includes standard legacy and modern ports for its era: : Separate ports for keyboard and mouse. USB : 4x USB 2.0 ports (with headers for 4 more).
Official physical manuals are rare for OEM boards, but you can find digital resources and driver packs at:
Here are some of the most referenced files for the ECS RC415T-AM:
The RC415T-AM, often known as the ECS RC415T-AM or part of the Acer Power F6/Aspire T660 systems, features the ATi Radeon Xpress 200/1100 chipset series. It is a Micro-ATX board built for the LGA 775 Socket. Key Features MicroATX (244mm x 244mm). Socket Type: Socket T (LGA 775).
If you'd like, let me know (e.g., won't turn on, BIOS beep codes) you're experiencing with this board, and I can provide specific troubleshooting steps. ECS RC415T-AM - The Retro Web
1 × UltraDMA 133/100/66 connector (supports 2 IDE devices) Integrated Subsystems
Orientation Tip: For LEDs (Hard Drive and Power), the positive (+) wire is usually colored (red, green, or blue), while the negative (-) wire is typically white or black. For the Reset and Power switches, orientation does not matter. 5. Clear CMOS Jumper Settings
Because it was built for specific PC brands, a standalone "retail" manual is difficult to find. Instead, users must rely on the technical specifications and jumper settings derived from the original system documentation. 1. Hardware Specifications rc415t-am motherboard manual
Understanding the hardware limits of your board prevents component damage during upgrades. Specification Details Micro-ATX (24.4 cm x 24.4 cm) CPU Socket LGA 775 (Socket T) Chipset ATI Radeon Xpress 200 (RC415) + SB600 Front Side Bus (FSB) 800 / 533 MHz Memory Slots 2 × 240-pin DDR2 DIMM Max Memory 2 GB (Some OEM BIOS revisions support up to 4 GB) Memory Type DDR2 667 / 533 / 400 MHz Non-ECC, Unbuffered Expansion Slots 1 × PCIe x16, 1 × PCIe x1, 2 × PCI Storage Interfaces 4 × SATA 3.0 Gb/s ports, 1 × IDE (PATA) Ultra DMA 133 Audio Realtek ALC888 8-Channel High Definition Audio Network (LAN) Realtek RTL8100C 10/100 Mbps Ethernet Processor and Memory Compatibility CPU Support
This document is a comprehensive manual for the RC415T-AM motherboard. It covers specifications, layout, installation, BIOS configuration, driver and OS setup, troubleshooting, maintenance, and safety. It's written to help technicians, system builders, and advanced users install, configure, and maintain systems based on the RC415T-AM. 1 × UltraDMA 133/100/66 connector (supports 2 IDE
The exact you are experiencing?
The back panel includes standard legacy and modern ports for its era: : Separate ports for keyboard and mouse. USB : 4x USB 2.0 ports (with headers for 4 more). Clear CMOS Jumper Settings Because it was built
Official physical manuals are rare for OEM boards, but you can find digital resources and driver packs at:
Here are some of the most referenced files for the ECS RC415T-AM:
The RC415T-AM, often known as the ECS RC415T-AM or part of the Acer Power F6/Aspire T660 systems, features the ATi Radeon Xpress 200/1100 chipset series. It is a Micro-ATX board built for the LGA 775 Socket. Key Features MicroATX (244mm x 244mm). Socket Type: Socket T (LGA 775).
If you'd like, let me know (e.g., won't turn on, BIOS beep codes) you're experiencing with this board, and I can provide specific troubleshooting steps. ECS RC415T-AM - The Retro Web