Proceq Profometer 4 | Manual

Offers higher spatial resolution for tightly spaced reinforcement bars. Connecting Cable: Links the probe to the control unit.

Hold the probe high in the air, at least 1 meter (3 feet) away from any concrete walls, floors, or metallic objects. Press the button.

Unlocking the Proceq Profometer 4 : A Comprehensive Guide & Manual Breakdown The Proceq Profometer 4

Move the probe slowly across the concrete surface in a perpendicular direction to the bars. proceq profometer 4 manual

: Before every measurement session, you must "zero" the device. Hold the probe in the air away from any metal and press the reset or zero button.

Perform the "Zeroing" operation as prompted by the screen or manual. Ensure the display shows zero cover. 3. Operation and Measurement Techniques Profometer 4 Go to product viewer dialog for this item.

Standard AA batteries or a rechargeable battery pack. 2. Step-by-Step Operating Instructions Press the button

Once a bar is successfully located and its direction is mapped, align the probe parallel to the adjacent bars to minimize side-interference.

Following the manufacturer’s instructions is critical for accurate readings. 3.1 Initial Setup and Calibration

Avoid exposing the universal probe to prolonged direct sunlight or surface temperatures exceeding 60∘C60 raised to the composed with power C Hold the probe in the air away from

Hold the universal probe out in the open air, away from any concrete, metal walls, watches, or steel-toed boots.

Are you dealing with a specific structural layout, like or deep beams ?