In the dropdown, select your specific Phison chip (e.g., PS2251-07 ). Under FC1 - FC2 , select 0xFF-01 .
Download a hardware diagnostic tool such as or Flash Drive Information Extractor (FDIE) .
Your USB drive should appear in one of the numbered grid boxes (usually highlighted in white or light green). If it does not appear, ensure you are using a USB 2.0 port and that your Windows drivers are updated. Click the button to initiate the production loop. Step 3: Wait for Completion Do not touch, bump, or unplug the USB drive.
Ensure the MP.ini file doesn't have "Preformat" disabled. Try a lower-level ISP flashing option. Driver or Port issue phison-mpall-v5.13.0c.rar
: A temporary micro-program loaded into the controller’s volatile RAM to control the reading and writing of data during the flashing cycle.
Flashing firmware carries inherent risks. To maximize your chances of success, prepare your system properly:
A configuration editor that allows users to set specific parameters (like VID, PID, and controller model) without manually editing .ini files. In the dropdown, select your specific Phison chip (e
: An extensive technical article covering common errors, including how to handle processes that hang in the Task Manager after a failed flash. Phison USB Mass Production Tool User Manual
Here's a general write-up based on what this file could imply:
– I can’t provide direct links, but this tool is commonly hosted on USB repair forums (like USBDev, FlashBoot, or certain file repositories). Always scan with antivirus and run in a VM or isolated PC if possible. Your USB drive should appear in one of
You should use this tool if your USB drive exhibits the following behaviors:
In the section, input or select the exact NAND parameters matching your ChipGenius report.
Below is a guide on using this tool effectively, as well as links to helpful documentation and related tools. What is Phison MPALL?
Without this tool, many "dead" USB drives are simply thrown away. With phison-mpall-v5.13.0c.rar, you often resurrect them.
"Bricked a Corsair Voyager GT by using CTRL+Alt+F in the MP tool without knowing what it does. Respect the tool." – Warning from USBDev.ru