Note: If "SUL" remains after 10 hours, the battery may be beyond repair.
MotoMaster Battery Charger (Model 11-1567) is a versatile 12V charging system designed for various lead-acid battery types, including conventional (flooded), AGM, gel cell, and deep cycle. It features a multi-stage charging process, a reconditioning mode for sulfated batteries, and an engine start function for low-battery vehicle boosting. Key Technical Specifications Voltage Support: Designed exclusively for 12V batteries Charge Rates: Adjustable rates typically include (slow/maintain), (fast charge), and a engine start/boost. Charging Time:
The MotoMaster 11-1567 is engineered as a smart, transformer-based charging system featuring: motomaster battery charger 111567 manual verified
Use in a well-ventilated area. The charger should be placed as far from the battery as the cables allow.
Remove the battery caps (if serviceable). Check electrolyte level. Add distilled water if plates are exposed. Note: If "SUL" remains after 10 hours, the
is a popular choice available through Canadian Tire. Whether you are maintaining a battery over the winter or reviving a dead battery, knowing how to use this device correctly is key to safety and longevity. This article provides a detailed overview of the MotoMaster battery charger 111567 manual
: Unplug the AC power cord from the wall first , then remove the negative (black) clamp, and finally the positive (red) clamp. Troubleshooting & Error Codes Remove the battery caps (if serviceable)
The information compiled here is derived directly from the user manuals for the Motomaster Classic Series, Simple Series, and Eliminator chargers . These models share the same operational logic, safety features, and LED indicator systems as the 111567 model. Therefore, this information is as close to "verified" as possible for a product whose specific manual is no longer in wide circulation.
Charging time depends on the battery’s capacity (Amp‑hours) and the selected charge rate. A typical 50Ah car battery will charge in approximately 3–4 hours at 15A, or 15–20 hours at 3A. The automatic microprocessor adjusts the time based on the battery’s condition.
Disclaimer: This guide is for informational purposes. Always wear safety glasses and work in a ventilated area when working with lead-acid batteries.