Markem Imaje Smartdate X40 Manual ((new)) «90% COMPLETE»

The flexible film must pass smoothly over the print pad or rubber roller without wrinkling.

The X40 allows for flexible mounting orientations, including intermittent or continuous modes.

Ensure the alignment pin is correctly placed when reinstalling the lid.

Allows operators to browse and load pre-designed templates. markem imaje smartdate x40 manual

Intermittent up to 600 mm/s; Continuous up to 600 mm/s.

Check the threading path against the manual diagram. Clean the printhead to remove burnt-on ink. Lower the print darkness settings in the job profile. Fault: Poor Print Quality / Missing Dots

The SmartDate X40 system consists of two primary components: the printhead body (mechanical unit) and the electronic controller (user interface). It is designed to integrate seamlessly into both intermittent and continuous packaging machines. Key Specifications The flexible film must pass smoothly over the

Proper maintenance ensures the long lifespan of the printer.

The printer can operate in two primary modes:

Up to 600 mm/s for continuous mode; up to 250 packs/minute for intermittent mode. Allows operators to browse and load pre-designed templates

Complete Guide to the Markem Imaje SmartDate X40: Operation, Maintenance, and Troubleshooting

The direct drive design manages tension automatically. Selecting a Print Job Navigate to the main screen on the User Interface . Select the desired job from the stored list.

Increase printhead pressure mechanically or adjust software darkness by increments of 2. Encoder wheel slipping or incorrect line speed setting.