Onboard 10/100 Mbps Ethernet port for direct communication with the Lenel OnGuard server.
LNL-3300-M5 Dual Reader Interface Module (w/ M5 form factor, PoE+)
is a highly capable intelligent controller designed specifically to modernize legacy security systems. It serves as the cornerstone of the migration strategy, allowing for a straightforward upgrade from older CASI M5, M3000, and similar systems to the advanced Lenel OnGuard platform. This article provides a comprehensive overview based on the LNL-3300-M5 lenel lnl3300m5 installation manual upd top
Set DIP switch SW2-1 to the position to force default IP communication.
Unscrew the mounting standoffs securing the legacy CPU board and lift it out of the enclosure. Step 2: Mounting the LNL-3300-M5 Onboard 10/100 Mbps Ethernet port for direct communication
Turn DIP switch SW2-1 back to and cycle power to the board to apply the new static IP address. OnGuard Software Configuration Open the System Administration application within OnGuard.
*Note: As of September 2022, new security enhancements were available for the LNL-3300-M5 with firmware version 1.194. Users must have ADMIN permission level to update firmware. This article provides a comprehensive overview based on
The downstream RS-485 port connects the controller to your legacy interface panels (such as reader sheets and input/output boards): RS-485 Data A Pin 2 (TR-): RS-485 Data B Pin 3 (GND): Signal Ground
Secure the board using the screws provided in the upgrade kit. Do not overtighten, as this can crack the printed circuit board. Wiring and Connections
