Native integration with Infineon miniWiggler, DAS (Device Access Server) architecture, and various third-party debug probes.
Alternatively, you can search “Memtool” on the (infineon.com) to locate the latest version.
烧录操作完成后，立即点击“Verify all”按键进行数据校验，确认写入内容与Hex文件内容完全一致，确保编程正确无误。
首先，编译生成包含UCB配置信息的Hex程序文件。许多示例工程代码中会预置这些UCB默认值。然后，通过Memtool打开Hex文件，将文件中的UCB数据添加到编程列表。选择“Program all”之后，UCB数据就会被写入芯片的UCB保留区域。整个过程结束后，芯片可以识别正确的启动模式并从正确的地址启动。
Complete Guide to Infineon Memtool 4.9: Flashing, Configuration, and Troubleshooting infineon memtool 49
Select your specific microcontroller model from the device tree (e.g., TC39x ). Step 2: Connection Setup
This article provides an in-depth look at Infineon Memtool 4.9, its features, supported devices, and how it fits into the development workflow. What is Infineon Memtool 4.9?
MemTool 4.9 is intended for a wide range of legacy and modern Infineon architectures: AURIX™ / TriCore™ (including preliminary support for TC49x and TC3x families) families (Arm® Cortex®-M) legacy 8-bit/16-bit families Notable v4.9 Updates 64-bit Architecture
Older versions (before 4.9) could run on Windows XP, Vista, 7, and 8, but the 64‑bit only requirement applies to later releases. Step 2: Connection Setup This article provides an
: Allows users to erase, program, verify, and protect on-chip memory modules. File Support : Primarily handles Intel-Hex files
Connect the debug cable to the target board's DAP/JTAG header. Power on the target board. Launch Memtool 4.9.
High-speed, robust debugging and flashing on modern platforms. UART / ASC Standard RS232 Port or USB-to-UART FTDI Cables
Older legacy industrial and automotive microcontroller families. Key Features of Infineon Memtool 4.9 1. Comprehensive Flash Management : Allows users to erase, program, verify, and
Check that the target board is powered on. Reduce the DAP communication frequency within the interface settings from 20MHz down to 5MHz or 1MHz to rule out signal integrity issues over long debug cables. 3. "Sector Protected / Verification Failed"
By following these steps, you can unlock the full potential of Infineon's MEMS technology and start developing innovative applications with MEMTool 49.
Before installing Memtool, install the Infineon Device Access Server (DAS) toolchain. DAS acts as the driver layer between your computer's USB port and the miniWiggler hardware. Ensure you install DAS version 7.x or newer to guarantee compatibility with Memtool 4.9. 2. Software Installation
Start Memtool and select the appropriate microcontroller family and communication interface.
Memtool 4.9 supports multiple standard production file formats, including Intel Hex ( .hex ), Motorola S-Record ( .srec / .s19 ), and raw binary ( .bin ) formats.