Connectors - Foxconn N15235 Motherboard Front Panel

If you have landed on this page, chances are you are staring at a bare Foxconn N15235 motherboard pulled from an Acer Aspire, a Packard Bell, or an old office PC. You see a cluster of small, metal pins in the bottom-right corner, and you have no idea which wire goes where. You are not alone.

| Pin | Signal | Color (typical) | Pin | Signal | Color (typical) | |-----|----------------|-----------------|-----|----------------|-----------------| | 1 | | Red/White | 2 | PWR_LED+ | Green/White | | 3 | HDD_LED− | White/Black | 4 | PWR_LED− | White/Black | | 5 | GND (Reset) | Black | 6 | PWR_BTN+ | Yellow/Red | | 7 | RESET+ | Blue/White | 8 | PWR_BTN− | Black/White | | 9 | RESET− | White/Black | 10 | N/C (key) | – |

: Always verify with the physical motherboard markings, as layout can vary slightly between board revisions. You can find technical documentation for this board on platforms like Scribd or through user communities like Spiceworks . foxconn n15235 motherboard front panel connectors

motherboard typically uses a 9-pin front panel header labeled , often located at the bottom-right corner of the board. FP1 Pinout Configuration

: The Power and Reset switches are momentary buttons, so they will function regardless of which way they are plugged into their specific pin pairs. If you have landed on this page, chances

Polarity for switches doesn’t matter (they just close a circuit), but LEDs require correct + / – to light.

Polarity does not matter. The power switch simply completes a circuit when pressed. | Pin | Signal | Color (typical) |

The Foxconn N15235 Go to product viewer dialog for this item.