Fix Firmware Ml2165 Ml2168 Chip Reset Printer Samsung 676 Link ((install)) Jun 2026

Resetting Samsung ML-2165/ML-2168 printers requires applying custom firmware matched to specific serial numbers and CRUM codes, which allows the machine to function without a chip. The procedure involves generating the fix, entering download mode, uploading via USB, and physically removing or covering the cartridge chip. Detailed instructions and firmware generation are available through

Updating the firmware and resetting the chip on Samsung ML2165 and ML2168 printers offer several benefits, including:

A: Yes. Once the chip is removed, the printer has no way of knowing what brand of toner you poured into the cartridge. You can use any compatible toner powder without restrictions.

The printer will flash its lights for 1-3 minutes. Do not turn it off. The printer will restart automatically when finished.

When the chip reaches this limit, the printer triggers errors such as Low Toner , Empty Toner , Replace New Cartridge , or a blinking red light. This happens even if you have refilled the toner bottle yourself. The only way to make the printer accept the refilled cartridge is to either replace the chip or reprogram the device's memory. This is where a "firmware fix" comes in. Once the chip is removed, the printer has

Release both buttons after 2 to 3 seconds. The LED status lights should change color or flash to indicate it is waiting for an update.

A small command prompt window will flash on your screen, showing progress bars or dots moving across the window.

Once you have obtained the correct .hd firmware file (often via platforms like eReset or ORPYS ): Connect your printer to your PC via .

Disconnect all USB devices from your computer except the printer. Press and hold the button. While holding it, press and hold the Power button. Do not turn it off

If your printer has been updated recently, you may simply need to reset the chip on your toner cartridge.

Once you have obtained the specific fix file (usually a .hd or .fls file) tailored to your CRUM and Firmware version, follow these steps:

For your convenience, here are some links to resources that may be helpful:

Once the chip reaches a pre-set limit, the printer permanently locks down, displaying errors like Replace Toner or Toner Exhausted . It will refuse to print, even if the cartridge is manually refilled with toner powder. The solution is a . It will refuse to print

If resetting fails, buy replacement (sold separately from toner).

| Error code | Root cause | Best fix | |---------------------|--------------------------------------|------------------------------------| | 676 link | Firmware blocked chip | Downgrade firmware | | #A1-6112 | Chip damaged or dead | Replace ML-2165/2168 chip | | Replace toner (full)| Chip counter full | Reset with hardware resetter | | No error but blank | Chip missing or misaligned | Clean & reseat chip |

If you recently replaced the toner or refilled it, the chip may be locked or incompatible with the installed firmware.