Over time, the slideways will develop play, leading to tool chatter and poor surface finishes.

Regularly check the gibs on the cross-slide and carriage. Adjust them so there is no play, but the movement remains smooth.

Tighten the grub screws evenly until you feel slight resistance when moving the handwheels.

typically has a range of spindle speeds, often managed by shifting belts on pulleys for different materials (slower for steel, faster for aluminum/brass). Using the Carriage

To cut specific thread pitches, you must configure the gear train on the left side of the headstock. Metric Threading Examples

An optional automatic 4-position tool turret allows for automated tool changes during a programmed cycle. Essential Accessories

Finding the authentic manual might take a bit of searching, but it is well worth the effort. Here are the best avenues to find it: 1. Specialized Machine Tool Archive Websites

Mounts directly to the lathe bed behind the headstock, transforming the machine into a combination mill-lathe.

*28T not standard — approximate with 30/45? Better to use conversion chart from manual.

If the outer collar is smaller, the headstock is pointing away from the operator and requires shim adjustment at the headstock mounting bolts. 3. Controls and Speed Selection

The Emco Compact 5 utilizes a combination of electrical switches and mechanical belt positioning to control spindle speed and feed direction. Electrical Controls