Drembo M6 Mixer User Manual Jun 2026

Connect a 3.5mm auxiliary cable from the mixer’s Live 1 or Live 2 port into the phone’s headphone jack.

Carefully remove the mixer from its packaging. Place the Drembo M6 on a sturdy, level surface with adequate space around it for cable connections and easy access to the controls.

Disable other desktop audio devices if you plan to manage desktop sound routing natively through the mixer hardware. 5. Maintenance and Troubleshooting drembo m6 mixer user manual

Connect the primary USB-C port to your PC or Mac. The Drembo M6 acts as a class-compliant external sound card. No driver installation is required for modern operating systems.

: 4 mono MIC/LINE inputs and 1 stereo channel (Channels 5 & 6). : Can be powered via USB (Type-C) directly from a computer or a 5V power adapter. Phantom Power : Includes a +48V switch to power condenser microphones. Connectivity : Features built-in and a USB port for MP3 playback or recording. Sound Card Connect a 3

: Noticeable "hiss" or residual noise when gain is set high, likely due to USB power interference. Build Quality

This is usually caused by a ground loop or electronic interference. If the mixer is plugged into a wall charger while you are using it, try unplugging it and running it solely on its internal battery. Additionally, ensure audio cables are not draped over power strips or power bricks. Issue 3: The microphone volume is extremely quiet. Disable other desktop audio devices if you plan

Unplug all cables from the mixer. Use a soft, dry, lint-free cloth to gently wipe the exterior surfaces, including the knobs, faders, and chassis. For stubborn grime, slightly dampen the cloth with water. Do not use harsh chemicals or solvents, as these can damage the finish.