Controls the transition smoothness between scenes. Bank and Chase Controls
Use the buttons to choose a destination bank (1 to 30).
Select your desired and set the faders for your first step. Press MIDI/Rec to save the step. Adjust faders for the next look, and press MIDI/Rec again. Repeat this process for up to 240 steps. Hold Program for three seconds to save and exit. Playing Back a Chase Press the desired Chase button (1–6) . Press the Auto/Del button to start automatic playback. Adjust the Speed slider to change step timing.
The Disco 240 is built on the international DMX512 standard, allowing it to communicate with various fixtures like moving heads and LED PAR lights. : 240 DMX channels.
Use the SCANNER buttons (P1-P12) to select which light(s) you want to control.
Repeat steps 3 and 4 to add subsequent steps. You can add up to 240 steps into a single chase.
Check that the DMX chain begins at the controller's "DMX Out" port and flows into the "DMX In" port of the first fixture. Ensure the fixture DMX addresses match the 20-channel controller layout precisely.
: Tap MUSIC/BANK COPY to trigger scenes via the built-in microphone or line-in. Technical Features
While the manual covers the basics, it leaves out "The Why" and "The How" of advanced troubleshooting.
This is the section where most users get stuck, and the manual often fails to provide a lifeline. Programming a generic DMX board is counter-intuitive; you have to clear memory, set sliders, record a scene, clear sliders, set new sliders, record scene two, etc.
Alternatively, press to sync the chase triggers to an internal microphone. 🛠️ Troubleshooting Common Issues
Yes. You can press multiple simultaneously. The controller will cycle through the selected chases in numerical order.
Press the Scanner/Fixture buttons (1–12) for the lights you want to adjust.
Controls the transition smoothness between scenes. Bank and Chase Controls
Use the buttons to choose a destination bank (1 to 30).
Select your desired and set the faders for your first step. Press MIDI/Rec to save the step. Adjust faders for the next look, and press MIDI/Rec again. Repeat this process for up to 240 steps. Hold Program for three seconds to save and exit. Playing Back a Chase Press the desired Chase button (1–6) . Press the Auto/Del button to start automatic playback. Adjust the Speed slider to change step timing.
The Disco 240 is built on the international DMX512 standard, allowing it to communicate with various fixtures like moving heads and LED PAR lights. : 240 DMX channels. disco 240 dmx controller manual
Use the SCANNER buttons (P1-P12) to select which light(s) you want to control.
Repeat steps 3 and 4 to add subsequent steps. You can add up to 240 steps into a single chase.
Check that the DMX chain begins at the controller's "DMX Out" port and flows into the "DMX In" port of the first fixture. Ensure the fixture DMX addresses match the 20-channel controller layout precisely. Controls the transition smoothness between scenes
: Tap MUSIC/BANK COPY to trigger scenes via the built-in microphone or line-in. Technical Features
While the manual covers the basics, it leaves out "The Why" and "The How" of advanced troubleshooting.
This is the section where most users get stuck, and the manual often fails to provide a lifeline. Programming a generic DMX board is counter-intuitive; you have to clear memory, set sliders, record a scene, clear sliders, set new sliders, record scene two, etc. Press MIDI/Rec to save the step
Alternatively, press to sync the chase triggers to an internal microphone. 🛠️ Troubleshooting Common Issues
Yes. You can press multiple simultaneously. The controller will cycle through the selected chases in numerical order.
Press the Scanner/Fixture buttons (1–12) for the lights you want to adjust.