Ensure the mattress spring platform is lowered to its absolute lowest setting.
Thread a medium-length Allen bolt (typically 2-1/2 inches) from the outside of the corner post directly into the side panel or barrel nut. Repeat this exact sequence for the right side panel. Step 3: Mount the Metal Mattress Support Frame
Never use power drills or drivers, as they can easily strip the wood or over-tighten and damage the hardware. Step-by-Step Assembly Instructions 1. Assemble the Headboard and Corner Posts
Once all panels are in place, go back and tighten all bolts securely. Ensure the mattress spring platform is lowered to
: Begin by attaching the side rails to the headboard and footboard. For many Babi Italia models, you’ll use 2 3/4-inch Allen bolts for the headboard and 2-inch bolts for the footboard. Corner Posts
At this point, the crib frame is a standing rectangle.
Secure each of the four brackets to the corner posts using the short Allen bolts or the specific safety screws provided in your hardware kit. Ensure the flat side of the spring frame faces upward to properly support the mattress. Step 4: Secure the Front Footboard Stationary Rail Step 3: Mount the Metal Mattress Support Frame
Lay the two side rails parallel to each other. Take the headboard and footboard and attach them to the rails using the provided screws or bolts. Ensure the corners are flush (aligned) before tightening them securely with your Phillips screwdriver or Allen wrench.
Mandatory as soon as your baby can pull themselves up to a standing position. This prevents accidental falls over the top rail edge.
Once all bolts and barrel nuts are in place, go back with your Allen wrench and tighten everything in a star pattern (like a car tire). This pulls the frame square. : Begin by attaching the side rails to
The mattress support frame (often a metal spring frame) must be installed before the final front rail.
: Every few months, check the bolts to ensure they haven't loosened from normal everyday use.
Choose your desired height level on the four corner posts of the crib frame.
Attach the front panel to the sides using the remaining bolts. Tip: Align the dowels first, then insert the bolts. Step 5: Final Tightening
: Assemble the crib on a soft, flat surface—like a carpet or the original cardboard box—to prevent scratching the wood finish. Step-by-Step Assembly Guide