Atir Strap And Beamd With 72 Install 'link' – High Speed

[Download lic21.exe] ➔ [Run Installer] ➔ [Set Paths] ➔ [Region Setup] ➔ [Finalize] 1. Download and Extract the Setup Executable

Also, never use the ATIR strap in a “slip-critical” application where movement is required (e.g., expansion joints). The 72 install locks the beam and post into a rigid assembly.

When using power impact drivers, be careful not to "dimple" the strap. Over-driving fasteners can micro-crack the steel, leading to premature failure under stress. atir strap and beamd with 72 install

If using SDS screws, torque to manufacturer spec (typically 90-110 in-lbs). Check that no gap exists between the strap and wood. A gap of more than 1/32” voids the load rating.

The ATIR (Adjustable Tension/Inclination Restraint) strap is a heavy-gauge galvanized steel connector designed to transfer tension and shear loads between a beam and a supporting column or post. Unlike fixed-angle brackets, the ATIR features a unique elongated slot and a swivel plate mechanism. This allows for angular adjustments on site—a lifesaver when dealing with irregular geometries or retrofitting existing structures. [Download lic21

: Empty C:\Users\ \AppData\Local\Temp to eliminate overlapping install script caches.

Steel: ... The new "General combined steel shapes" may be designed by the Steel design module (refer to the Geometry enhancements) CivilEA.com When using power impact drivers, be careful not

A: Visit the official ATIR Engineering Software website (atirsoft.com) or contact your local distributor to download the latest service packs and version updates.